Vertical Feed Mixer

Vertical Feed Mixer

What is the Cetinkayalar NCK-08 YK vertical feed mixer?

The Cetinkayalar NCK-08 YK is a 3-point mounted vertical feed mixer that blends straw, silage, concentrate feed and mineral supplements into a homogeneous Total Mixed Ration (TMR). Available in 1 m³, 2 m³ and 3 m³ capacities, it is PTO-driven at 540 rpm and designed for small to medium livestock operations.

Built on Cetinkayalar Agriculture's 50+ years of agricultural engineering experience, the NCK-08 YK series standardizes daily ration preparation and eliminates feed waste in livestock operations. The vertical auger system, impact-resistant steel chassis, and standard 3-point hitch connection make it compatible with all major tractor brands at 45 HP and above.

NCK-08 YK Vertical Feed Mixer Models

Technical Advantages of the NCK-08 YK Vertical Feed Mixer

Vertical Auger System: Homogeneous Blend in Minimum Time

The vertical mixing auger breaks down long-stem roughage — straw, hay, whole-crop silage — and distributes all components into a uniform blend within minutes. Selective eating (sorting) behavior is eliminated. Every animal receives the same nutrient ratio at every feeding.

3-Point Mounted Type: Compact and Maneuverable

All NCK-08 YK models connect directly to the tractor's 3-point linkage and draw power from the PTO shaft. No trailer or separate towing vehicle is needed. The compact footprint allows operation in narrow barn aisles and small yard areas where wagon-type mixers cannot maneuver.

Compatible Feed Materials

• Wheat and barley straw
• Maize and grass silage
• Concentrated and compound feed
• Dried hay and alfalfa
• Mineral and vitamin supplements

Which NCK-08 YK Model Is Right for Your Operation?

Daily ration volume and herd size determine the correct model. The 1 m³ model serves herds of 10–30 head; the 2 m³ model fits 30–80 head operations; the 3 m³ model delivers optimum capacity for 80–150 head. Cetinkayalar's technical team provides free model recommendations based on your specific operation profile.

Please contact us for more information.

FAQ — Frequently Asked Questions

1. What tractor HP is required for the NCK-08 YK vertical feed mixer?

The NCK-08 YK series is compatible with tractors at standard 540 rpm PTO output. Minimum recommended tractor power: 45 HP for the 1 m³ model, 55 HP for 2 m³, and 65 HP for the 3 m³ model. Running below minimum HP reduces mixing quality and accelerates wear on the drive components.

2. What is the difference between a mounted vertical feed mixer and a trailed model?

A mounted (3-point) vertical feed mixer like the NCK-08 YK connects directly to the tractor hitch and draws PTO power without a separate trailer. This makes it significantly more compact and maneuverable in confined barn spaces. Trailed mixer wagons are typically chosen for larger capacities where daily ration volumes exceed what a mounted model can deliver efficiently.

3. Can the NCK-08 YK mix maize silage?

Yes. The NCK-08 YK's vertical auger handles maize silage effectively. Due to the high moisture content of maize silage, mixing time should be shorter than for dry roughage to prevent over-processing. Loading order matters: silage first, then dry materials on top — consult the Cetinkayalar technical manual for the optimal sequence for your specific ration formulation.

People Also Ask (PAA)

What is TMR feeding for livestock?

TMR (Total Mixed Ration) is a livestock feeding method where all feed components — roughage, silage, concentrate, minerals — are combined into a single homogeneous blend. The NCK-08 YK vertical feed mixer prepares this blend. TMR feeding eliminates selective eating, reduces feed cost per animal, and produces measurable improvements in milk yield and weight gain consistency.

How long does a vertical feed mixer take to prepare one TMR batch?

On the NCK-08 YK, a standard TMR ration including loading time is completed in 8–15 minutes. This varies by material type (roughage fiber length, silage moisture) and fill level. The vertical auger is optimized to reach homogeneous blend at low power consumption, minimizing both time and fuel cost per batch.

Does a feed mixer reduce feed waste?

Yes. In a homogeneous TMR blend, animals cannot sort preferred components from the ration. This eliminates selective sorting — the primary cause of feed waste in loose feeding systems. Every mouthful carries the same nutrient balance, reducing leftover feed and lowering daily feed cost per head.

Is the NCK-08 YK the same machine as a straw chopper?

No. The Cetinkayalar NCK-03 SM straw chopper collects and processes field crop residues into feed material. The NCK-08 YK feed mixer combines ready-processed materials — straw, silage, concentrate — into a precisely proportioned ration. The two machines are complementary: the fine-chop straw produced by the NCK-03 SM is one of the most common roughage inputs used in the NCK-08 YK.